15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/27/11 schematics allied da tec ode AGSC-2408S dimensions: mm(inch) unless otherwise specified, all tolerances are 0.25(0.010) 18.20 (0.7 17) 12.15 (0 .478) 13 .97(0.5 50) 0. 46(0.0 18) 6.20 ( 0.24 4) 1.27( 0.05 0) 0.250.13 (0.01 0 0.0 05) 16.0 (0.6 30) 16 .76 (0.6 60) 12.18 (0.4 79 13.97 (0.55 0) 1.27 (0.05 0) 0.76 (0.03 0) 1. 30(0.5 11) 0-8 6.80 (0.268)max 1ct:1 13 1 td1 2 3 4 5 6 7 8 9 10 11 12 td2 td3 td4 tx4 14 15 16 17 18 19 20 21 22 23 24 tx3 tx2 tx1 1ct:1 1ct:1 1ct:1 all specifications subject to change without notice. mechanical 100/1000 base t gigabit single port AGSC-2408S cw/w: 25pf typ @ 100khz, 200mv ll: 0.5h max @ 100khz, 200mv dcr: 0.9 operating temp: 0oc to +70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AGSC-2408S 350 1ct:1 -1.1 -18 -14.4 60-80mhz -12 50mhz -13.1 part number AGSC-2408S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -32 0.3-30mhz -35 60mhz isolation ?
|